|
|
|||||||||||||||
|
Vinyl
| Velour | Leather
| Adhesives
|
Analine Dye
| Carpets |
Cleaners / Dressings | Complete
Kits | Containers | Dashboard/Plastics
| Deodorizing Equipment
/ Tooling | Glossary | Heat
Guns / Welding Tools | Paints / Chemicals
| Safety | SEM
products | Sewing | Spraying
Equipment | Training
LEATHER FILL - A water
based compound used for small cracks and blemishes. Air cures and is easy
to sand. LEATHER CRACK FILL - A solvent based compound used for repairing surface cracks that air drys and sands easily. LEATHER CREAM FILL - A water based compound used to for a smooth skin finish over the repaired area. Apply with a paper towel quickly and let air dry. This will provide a final base from which to texture and color. LEATHER PRIMER - This is designed to help adhesion on other compounds if you are having problems with the color not adhering. LEATHER SMELL CONDITIONER - A basic leather conditioner that contains a high leather smell. LEATHER SOFT FILL - Use to fill in any pinholes or minor imperfections. Just a quick swipe with the pallette knife will do, much like using spot putty. Let air dry. DEEP LEATHER FILL - This water base leather compound is used for deeper cracks. It is an air cured compound that needs to be layered, allowing time to dry in between coats. Use the other compounds as needed to finish the repair. LEATHER ADHESIVE - This should be wiped into any exposed leather fibers such as in frayed areas, slices part way through or where there may be a series of digs in the leather that can be brushed back and laid back down. Do not leave Leather Adhesive on the surface to the original finish. Allow to air dry. Also used as adhesive to secure a subpatch. LEATHER CLONE - A two-step process is used to duplicate the same grain impression you will need to finish your repair. When you are ready to grain, spray a light tack coat over the entire area you are graining, wait about fifteen to twenty seconds then spray a wet coat. Make a graining pad with the same texture. Spray your activator on the pad and on the repaired area, then press the pad over the repair area and hold for about thirty seconds. Now dab off the excess moisture to see the grain. Repeat until you achieve the desired texture. HEAT CURED LEATHER COMPOUND - A low temperature heat cured compound used in repairing leather the same way vinyl repair compound is used. You can also use the other leather products to finish off the repair as needed. Call
or email us for
products you cannot find. ©
Thrifty MacEnterprises, Inc. All Rights Reserved. |
||||||||||||||||