GRAINING COMPOUND - A white silicone compound used for making grain impressions. Using approximately one ounce of compound per pad, mix with six to eight drops of the catalyst, then pour the compound on the area you wish to duplicate the grain. Spread evenly with a palette knife and let dry. After a time you will create a library of different pads with various grains that can be used repeatedly again.

GRAINING COMPOUND CATALYST - This is the catalyst for the graining compound. Use six to eight drops of the catalyst to one ounce of compound.

GRAINING PAD SET - We have compiled a set of fifteen graining pads with the most popular grains embedded in them. These pads have a vinyl backing to help you identify the pattern on the grain and to protect your hands from the heat.

GRAINING PAPERS SET - A set of 6 different thin papers (3" x 8") with grains to be used with our heat iron to reproduce your grain.

THINNER - Vinyl Repair Compund - This thinner is used on Vinyl Repair Compound to thin out the compound should it start to thicken up.

VINYL MESH - A fine nylon mesh sprayed with a fiber coating to give added strength. Used for reinforcing vinyl repairs. By putting a thin layer of Vinyl Repair Compound on the surface, then a swatch of Vinyl Mesh, followed by another layer of Vinyl Repair Compound, you heat weld the repair together like a sandwich for strength and durability.

VINYL REPAIR COMPOUND - Used to repair vinyl by using a heat welding process. Our compounds come in regular and thick. We also stock various colored compounds.

VINYL SUB PATCH - Used for reinforcement underneath the area to be repaired. Cut a piece about one quarter of an inch wider than the damaged area, then secure in place by using vinyl repair compound.

VINYL SUB PATCH - A reinforcement material used exactly as basic except for one side contains its own adhesive.